S15-I

Description

International norms (NILECJ-0601 L1-5/IP40-41/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS Multi-Zone – 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right) Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination. Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm. No Interferences between Zones and No False Alarms Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top Detects Metals regardless their orientation 10 sensitivity levels, 246 adjustable sensitivity steps at each Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4×20 Characters LCD Screen Special Environmental Magnetic Interference Display Menu Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation IP 40-41 Protection Level (EN 60529) Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero. Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken. Four-digit changeable digital Pin Code Automatic Failure Display Function on LCD Reloading the factory default settings by one-touch button Easy Programming and Display via High Resolution LCD (Liquid Crystal Display) 4 Menu Languages, Standard menu in English, German, Spanish and Turkish Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains No seasonal adjustment requirement thanks to its Digital Electronic System (DSP) Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design Manufactured for 7/24 Continuous Operation 74 cm Net Passage Width and 200 cm Net Passage Height Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects Audio-Visual alarms are noticeable at a range of 2 meters Micro-Processor Settings does not change when there is an electricity cut-off All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units. Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use. Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment) SCADA remote data communication and Networking of Multiple Metal Detectors – Send – Change settings by PC – Software Optional Manufactured using the latest technology components and Resistant to Vibration & Impact